Blog
What Do OTR Tire Sizes and Sidewall Markings Mean?

An off-the-road (OTR) tire’s markings describe its size, construction, intended service, and capacity. You will usually see tire width and rim diameter. An R indicates radial construction, while a slash is common in some bias-ply size formats. Application and tread codes may also appear, along with a tread depth designation.
Two tires that fit the same rim are not automatically interchangeable. Compare outside diameter, width, load capacity, speed rating, and suitability for the tire’s position on the machine. A diameter mismatch on a dual-wheel assembly or four-wheel-drive machine can cause unwanted speed differences and strain. The tread code also helps match a tire to sand, rock, or paved yards.
Photograph the full sidewall marking and the equipment data plate, then compare them with the machine manual and tire catalog. If wear has obscured part of the code, do not guess the size by eye. Check the previous part number or the tires on the same axle, after confirming those tires were correctly specified.
Key takeaway: Size starts the selection process; load, speed, construction, and application determine whether the tire really fits the job.